SHOWTEC IP Pixelstrip 40 40x RGB LED pixel bar - IP65 - 50 cm

The Showtec IP Pixelstrip 40 is a high-brightness LED bar with pixel control. Each of the 40 RGB LEDs can be controlled individually by the dedicated Showtec IP Pixel Controller. It has an IP65-rated enclosure with fanless convection cooling, making it suitable for indoor as well as (temporary) outdoor stage applications.
The short and fixed combined data/power input cable allows the IP Pixelstrip 40 to be daisy-chained and mixed with the IP Pixelstrip 80 up to a total length of 4 metres per controller output. Dedicated cables run from the controller to the IP Pixelstrip for power and data signals (sold separately). A straight alignment plate is included and locks into place without tools. Optional alignment plates allow for more complex configurations, even 3D setups. A standard smoked black flat cover is included and can be easily replaced by an optional white flat cover, white dome-shaped cover or white rectangular cover.
Please note that stand-alone or direct DMX operation is not possible; the Showtec IP Pixel Controller is required to drive this LED pixel bar.Technical data:

Light Source Type:	LED
Light Source Quantity:	40
Refresh Rate:	16000 Hz
Brightness:	9200 nits
Pixel Pitch:	12.5 mm
Dimmer:	0-100 %
Strobe:	0-20 Hz
Power Supply:	48 V DC
Power Consumption:	16 W
Power Connector In:	Dedicated IP65 Powerconnection
Power Connector Out:	Dedicated IP65 Powerconnection
Height (mm):	95 mm
Width (mm):	35 mm
Length (mm):	504 mm
Weight:	1.6 kg
IP Rating:	IP65
Housing:	Aluminium
Colour:	Black
Cooling:	Passive
Mounting Options:	Bracket
Safety Attachment:	Yes
Maximum Ambient Temperature:	40 °C
Minimum Ambient Temperature:	-5 °C
Included Cables:	Fixed Cable
Included Accessories:	Cover
Included Rigging:	Straight alignment plate