How do I connect a 3-phase track system?

Connecting a 3-phase track system requires a 5-core cable (three phases L1/L2/L3, neutral N and protective earth PE) from your distribution board to a feed-in unit mounted on the track. The feed-in unit can be an end-feed type (attached at the track terminus) or a mid-feed type (inserted into the middle of a track run). Ensure the feed-in unit matches the earth orientation (earth-left or earth-right) of your track profile. Each phase should be protected by a 16A circuit breaker. After connecting the feed-in, mount fixtures using Euro adapters and select the desired phase (L1, L2 or L3) using the phase-selection wheel on each fixture. Always have installation work performed by a qualified electrician in accordance with local electrical codes and DGUV Vorschrift 17 for event technology applications.

Which manufacturers produce 3-phase track rails?

Professional 3-phase track rails are manufactured by several leading lighting brands. SLV produces the widely adopted EUTRAC system, which has become an industry standard for cross-compatibility. Other major manufacturers include Global Truss, Staff, Osram, Philips and Deko-Light. Many of these systems use the standardised Euro adapter interface, allowing fixtures from one manufacturer to be mounted on tracks from another. LTT supplies EUTRAC-compatible track systems and accessories from multiple manufacturers, ensuring you can source components that meet your project requirements and budget while maintaining compatibility with existing installations.

What lamps work with 3-phase track systems?

3-phase track systems 230V accept any track-mounted fixture equipped with a compatible Euro adapter. This includes LED track spots (typically 15–50W), adjustable spotlights with GU10 or GU5.3 lamp holders, larger Fresnel or profile spots for theatrical applications, and specialised fixtures such as gobo projectors or wall-washers. Modern installations predominantly use LED fixtures for their energy efficiency, long service life and low heat output. Older halogen and metal-halide track fixtures are still compatible but consume significantly more power (50–150W per fixture). When selecting fixtures, verify that the adapter matches your track's earth orientation (earth-left or earth-right) and that the total wattage of fixtures on each phase does not exceed the 16A (approximately 2,900W practical working load) rating.

Can I add sockets to a 3-phase track?

Yes, specialised track-mounted socket adapters are available that allow you to connect standard mains-powered equipment to a 3-phase track system. These adapters feature a Euro track mount on one side and a standard Schuko or UK-style socket on the other, drawing power from one of the three phases (selectable via the adapter's phase wheel). Track socket adapters are commonly used in exhibition and retail environments to power point-of-sale displays, demonstration equipment or temporary workstations without running separate extension cables. However, ensure that the combined load of all devices and lighting fixtures on each phase does not exceed the 16A rating. For high-power equipment, consider dedicating an entire phase to socket outlets and using the other two phases exclusively for lighting.

What is the difference between 1-phase and 3-phase track systems?

Single-phase track systems provide only one switchable circuit, meaning all fixtures mounted on the track turn on and off together. 3-phase track systems offer three independently switchable circuits (L1, L2, L3), each rated at 16A, allowing you to create multiple lighting scenarios from a single track installation. For example, in a retail environment you might assign general ambient lighting to phase 1, product accent spots to phase 2 and window display lighting to phase 3, with each circuit controlled by a separate switch or dimmer. This flexibility eliminates the need for multiple parallel track runs and simplifies wiring. Physically, 3-phase tracks require a 5-core cable connection (versus 3-core for single-phase systems) and use asymmetric profiles with designated earth-left or earth-right orientation, whereas single-phase tracks are typically symmetric.

How many lights can I connect per phase on a 3-phase track?

Each phase of a 3-phase track system is rated for 16A at 230V, providing a theoretical maximum of 3,680W. However, professional practice recommends operating at no more than 80% of rated capacity to allow thermal headroom and accommodate inrush currents, reducing the practical working load to approximately 2,900W per phase. The number of fixtures you can connect depends on their individual power consumption. For example, if using 25W LED track spots, you could connect up to 116 fixtures per phase (2,900W ÷ 25W). With 50W spots, the limit drops to 58 fixtures per phase. For older 100W halogen spots, you would be limited to 29 fixtures per phase. Always distribute fixtures evenly across all three phases to balance the electrical load and avoid overloading any single circuit. Calculate total fixture wattage before installation and verify that your distribution board circuit breakers are appropriately rated.

Are 3-phase track systems suitable for touring stage productions?

Yes, 3-phase track systems are widely used in touring stage productions due to their quick-connect nature and flexibility. Touring rigs often pre-install track rails in venue ceilings or on overhead truss structures, allowing lighting crews to simply clip fixtures into position during load-in without running individual power cables to each spotlight. The three independently switchable phases enable lighting designers to create layered stage washes, key lighting and effect lighting from a single track infrastructure. For touring applications, choose robust track systems with reinforced connectors and high-quality spring contacts that maintain reliable electrical connection after repeated fixture insertions and removals. Transport tracks in protective cases to prevent damage to conductor channels and mounting flanges. Document the earth orientation (earth-left or earth-right) of your track inventory to ensure all sections and connectors are compatible during setup.

What safety standards apply to 3-phase track installations in event venues?

In Germany, 3-phase track installations in event and entertainment venues must comply with DGUV Vorschrift 17 (formerly BGV C1), which governs electrical equipment in these environments. While track rails are not typically classified as flying rigging, any suspended installation must be designed with adequate safety factors and documented load calculations. Ceiling fixings must be rated for the combined weight of track, fixtures and a safety factor of at least 5:1. Electrical connections must be performed by qualified personnel in accordance with VDE standards, with each phase protected by appropriately rated circuit breakers (typically 16A Type B or C). Track systems must maintain IP20 protection class for indoor use. Professional installations should be inspected annually to verify conductor integrity, secure mounting, proper earth continuity and absence of overheating or mechanical damage. Always consult local electrical codes and engage qualified electricians and structural engineers for permanent or high-load installations.

3 phase power track 230V

Top seller

Eutrac 3 Phase End Cap, black

€1.20 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phase End Cap, white

€1.20 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phasen Längsverbinder, elektrisch, schwarz

Eutrac 3 Phase Long Connector, electrical, black

€5.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3-Phasen Stromschienenadapter schwarz inkl. Montagezubehör

Eutrac PENDANT ADAPTER for 240V 3-phase track black, incl. installation

€9.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phase Pendulum Clip, black

€4.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phasen Einspeiser, rechts, schwarz

Eutrac 3 Phase Feed In, right, black

€7.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phasen Längsverbinder, elektrisch, weiß

Eutrac 3 Phase Long Connector, electrical, white

€5.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phasen Einspeiser, links, schwarz

Eutrac 3 Phase Feed In, left, black

€7.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

75 Articles

Filter

4 From 4 pages

No results were found for the filter!

Eutrac 3 Phasen DMX Terminator, Datenbus, schwarz

Eutrac 3 Phase DMX Terminator, Databus, black

Eutrac DMX Terminator black, DALI Material : Terminator is fabricated of self extinguishing polycarbinate accordingly to UL 94, class VO. (Color to match track) • Design : Removable cover is...

Express delivery possible

€49.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Eutrac 3 Phasen Einspeiser, Datenbus, links, grau

Eutrac 3 Phase Feed In, Databus, left, grey

Feed-in for the 240V 3-phase surface-mounted track system + Databus. Available in various colour versions, you can also choose the ground conductor's position left or right depending on your...

€31.79 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

Eutrac 3 Phasen L-Verbinder, Datenbus, außen, weiß

Eutrac 3 Phase L-Connector, Databus, outside, white

L-coupler with feed capability for the 240V 3-phase surface-mounted track system + Databus. Available in various colour versions, you can also choose the ground conductor's position left or right...

€40.33 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

4 From 4 pages

Facts

Professional 3-Phase Track Systems 230V – Flexible Power Distribution for Events and Stages: 3-phase track systems 230V are the professional solution for flexible lighting installations in event technology, stage construction and exhibition design. With three independently switchable circuits (L1, L2, L3), each rated at 16A, you can create multiple lighting scenarios from a single power connection. Whether you're illuminating a trade show... Read more »

Viewed