How many watts should an outdoor floodlight have?

The right wattage for an outdoor floodlight depends on the area you want to light. For small zones such as paths, terraces or single objects, 10–20 W is usually enough. Larger areas like driveways, courtyards and facades benefit from 30–50 W. For event and stage flooding, choose fixtures of 50 W or more, delivering up to around 16,500 lumens. Because modern LED floodlights reach roughly 90 lm/W, you get high brightness at low running cost. Always match wattage to lumen output and to the size of the surface rather than buying the highest wattage by default.

What IP rating do I need for outdoor floodlights?

For outdoor floodlights, IP65 is the practical minimum: it is dust-tight and protected against water jets, which covers most garden and event applications. For exposed positions or heavy rain, choose IP66 for protection against powerful water jets. Near pools, ponds or for ground-recessed installations, opt for IP67, which withstands temporary immersion. The IP code uses two digits — the first for solid particles, the second for water. For temporary outdoor events, where fixtures are exposed from every angle, never go below IP65 and combine it with a corrosion-resistant aluminium or stainless-steel housing.

What is the difference between warm white and cold white outdoor floodlights?

Warm white and cold white outdoor floodlights differ in colour temperature, measured in Kelvin. Warm white at around 3000 K produces a cosy, inviting atmosphere, making it ideal for terraces, facades and gardens. Cold or daylight white at around 6500 K produces crisp, functional light, well suited to security lighting, work areas and bright stage looks. Neutral white at 4000–4500 K sits between the two and suits paths and entrances. For natural-looking colours, choose a CRI of 80–90. At events, cold and neutral white often photograph best, while warm white creates intimate ambient scenes.

What is the difference between an LED spot and an LED floodlight?

An LED spot and an LED floodlight belong to the same product family but differ in beam angle and purpose. An LED floodlight uses a wide beam to illuminate larger areas evenly — driveways, courtyards, facades or stage backdrops — and is mainly functional lighting. An LED spot uses a narrow beam to accent a single object such as a tree, sculpture, flower bed or entrance, creating focused atmosphere. In practice, professionals combine both: narrow-beam spots to highlight details and wide-beam floodlights to flood whole areas. The choice comes down to whether you want accent lighting or wide-area flooding.

Which LED outdoor floodlight is best for the garden?

The best LED outdoor floodlight for the garden is a fixture with at least IP65 protection, a corrosion-resistant aluminium housing and a swivelling head you can aim at the object you want to highlight. For most gardens, 10–30 W in warm white (3000 K) creates an inviting atmosphere, while ground-spike models offer maximum placement flexibility thanks to plug-and-play cabling. If security matters, a version with a motion detector and twilight sensor deters intruders and reduces trip hazards. At LTT you find high-quality branded garden floodlights from manufacturers such as Osram, Ledvance, Philips and SLV.

Are solar-powered LED outdoor floodlights worth it?

Solar-powered LED outdoor floodlights are worth it for decorative garden and pathway lighting where no mains supply is available and convenience matters. They install without cabling and run on stored solar energy, which keeps electricity costs at zero. However, their brightness and runtime depend on sunlight and battery capacity, so output is generally lower and less consistent than mains-powered fixtures. For professional event and stage use, where reliable high output, DMX control and continuous operation are essential, mains-powered floodlights remain the better choice. Choose solar for accent and ambient garden lighting, and mains-powered fixtures for demanding or professional applications.

How do I mount an outdoor floodlight on a truss for an event?

To mount an outdoor floodlight on a truss for an event, attach it with a rigging clamp such as a Riggatec hook clamp to the aluminium truss tube, then add a secondary safety cable as a mandatory backup. Before lifting, check the floodlight weight against the load rating of both the truss and the clamp, and never overload the structure. Route weatherproof, IP-rated cabling cleanly and protect connectors from rain. In windy conditions, secure the structure and avoid rigging above an audience without a proper load calculation. LTT supplies Naxpro-Truss systems and Riggatec clamps engineered for professional outdoor event loads.

What does a professional outdoor event floodlight cost?

A professional outdoor event floodlight typically costs between €150 and €1000 or more, depending on output, control options and build quality. DMX-controllable fixtures with high lumen output, reinforced aluminium housings and IP65–IP67 protection sit at the higher end, while simpler event floodlights start lower. Garden and domestic LED floodlights are much cheaper, ranging roughly from €15 to €150. At LTT you also factor in mounting hardware such as rigging clamps and safety cables for truss installation. Every fixture comes with a 3-year LTT warranty and free shipping from €69, so you invest in lasting, event-grade quality.

Floodlights (outdoor)

ISOLED LED Street Light HE75, 3000K, 1-10V dimmbar mit Tageslicht- und Bewegungssteuerung

ISOLED LED Street Light HE75, 3000K, 1-10V dimmable with daylight and motion control, angle type III

ISOLED LED Street Light HE75, 3000K, 1-10V dimmable with daylight and motion control, angle type III : Length: 600 mm • Width: 270 mm • Height: 78 mm • Net weight: 3680 g • LED...

€484.50 *

incl. tax, free shipping to Germany
[International shipping costs]

Product data sheet

Availability:

Currently not available

ISOLED LED Flutlichtanlage LW 500W, 130x25°, 1 Modul (Lichtpunkt), DALI dimmbar, warmweiß, IP66

ISOLED LED floodlight system LW 500W, 130x25°, 1 module (light point), DALI dim, warm white, IP66

ISOLED LED floodlight system LW 500W, 130x25°, 1 module (light point), DALI dim, warm white, IP66 : Length: 395 mm • Width: 500 mm • Height: 358 mm • Net weight: 16300 g...

€1,501.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Product data sheet

Availability:

Currently not available

ISOLED LED Flutlichtanlage LW 500W, 130x25°, 1 Modul (Lichtpunkt), DALI dimmbar, neutralweiß, IP66

ISOLED LED floodlight system LW 500W, 130x25°, 1 module (light point), DALI dim, neutral white

ISOLED LED floodlight system LW 500W, 130x25°, 1 module (light point), DALI dim, neutral white : Length: 395 mm • Width: 500 mm • Height: 358 mm • Net weight: 16300 g...

€1,501.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Product data sheet

Availability:

Currently not available

SLV SYNA WIDE, Erdspiessleuchte, 3000 K, 115°, IP65, eckig, schwarz

SLV SYNA WIDE, ground spike light, 3000 K, 115°, IP65, square, black

The SYNA WIDE ground spike lights with IP65 protection are equipped with a 6 W LED and are available in the light colours 2200 K and 3000 K. They offer a wide 115° beam angle, ideal for...

€61.16 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Currently not available

SLV SYNA SHADE, Erdspiessleuchte, GU10 , 1x max. 10 W, IP65, rund, schwarz

SLV SYNA SHADE, ground spike light, GU10, 1x max. 10 W, IP65, round, black

The SYNA SHADE ground spike light with GU10 fitting offers excellent value for money and stands out with its timeless design. It supports 1x max. 10 W GU10 bulb and is equipped with a glare shield...

€39.29 *

incl. tax, plus shipping costs

Availability:

Currently not available