What thread sizes are available for eye bolts and eye nuts?

Eye bolts and eye nuts are available in metric thread sizes ranging from M6 to M48. Smaller sizes (M6–M12) are typically used for lightweight applications such as DJ lighting bars and small decorative elements, with WLL ratings from 0.08 tonnes to 0.75 tonnes. Medium sizes (M16–M24) are the workhorses of event rigging, suitable for truss attachment points, speaker clusters and moving-head fixtures, with WLL ratings from 1.5 tonnes to 8 tonnes. Large sizes (M30–M48) are reserved for heavy-duty applications such as motor hoists, large LED walls and structural steelwork, with WLL ratings up to 32 tonnes. At LTT, we stock the full range in both DIN 580/582 and EN 1677 Grade 8/10 variants, as well as fine-thread and UNC options for specialist applications.

What safety factors apply to rigging eye bolts according to DIN standards?

Standard eye bolts and eye nuts manufactured to DIN 580 and DIN 582 incorporate a 6-fold safety factor, meaning the component will withstand six times its rated Working Load Limit (WLL) before failure. Professional-grade components manufactured to EN 1677 (Grade 8 and Grade 10) use a 4-fold safety factor, but are made from higher-strength alloy steel and undergo 100% electromagnetic crack testing. The 4-fold factor is considered sufficient for professional stage rigging because EN 1677 components are subject to stricter manufacturing tolerances, traceability requirements and inspection protocols. Under DGUV Vorschrift 17, all load-bearing rigging hardware must be inspected annually by a qualified person, and any component showing signs of wear, deformation or corrosion must be withdrawn from service immediately.

Can eye bolts and eye nuts be used with side loading?

Fixed eye bolts (DIN 580) and eye nuts (DIN 582) must not be subjected to side loading according to the 2018 revision of the standard. Side loading creates a torque that can cause the bolt to rotate and unscrew from its threads, leading to sudden failure. For applications where the load direction is not perfectly vertical — such as bridle rigging, multi-point suspensions or dynamic loads — swivel eye bolts must be used instead. Swivel eye bolts feature a rotating joint that allows the eye to self-align with the load direction, preventing rotational forces from reaching the threads. At LTT, we stock swivel eye bolts from Riggatec and RUD in thread sizes from M8 to M48, all certified to EN 1677 and suitable for load angles up to 90° from vertical.

What materials offer the best corrosion resistance for stage rigging applications?

For indoor stage and event applications, galvanised steel eye bolts and eye nuts provide adequate corrosion protection at an economical price point. For outdoor events, touring rigs or venues with high humidity, stainless steel A2 (also known as 304 stainless) offers reliable corrosion resistance and is suitable for most European climates. For coastal venues, maritime applications or environments with chemical exposure, stainless steel A4 (316 marine-grade) is the material of choice, providing superior resistance to saltwater and aggressive atmospheres. Powder-coated eye bolts, typically finished in red or yellow, combine corrosion protection with high-visibility marking, making them easy to identify during rigging inspections. At LTT, we stock all three material grades in both DIN 580/582 and EN 1677 specifications.

How do I calculate the correct Working Load Limit for a bridle configuration?

When multiple chain legs converge at a single eye bolt in a bridle configuration, the load on the eye bolt increases due to the load angle factor. For a two-leg bridle with legs at 45° to the vertical, each eye bolt experiences approximately 1.4 times the suspended load. At 60°, the factor rises to 2.0. For a four-point bridle, divide the total load by four, then apply the angle factor to each leg. Always consult the manufacturer's load tables, which provide de-rating factors for various angles. As a safety margin, professional riggers typically specify eye bolts with a WLL at least 25% higher than the calculated load. For complex rigging scenarios, consider using rigging calculation software or consulting a qualified rigging engineer. At LTT, our technical team can assist with load calculations and component selection for your specific project.

What is the difference between Grade 8 and Grade 10 eye bolts?

Grade 8 and Grade 10 refer to the material strength and manufacturing standards defined in EN 1677. Grade 8 components are forged from high-strength alloy steel with a minimum tensile strength of 800 MPa, heat-treated to precise hardness specifications and 100% crack-tested. They offer a 4-fold safety factor and are the standard choice for professional stage and event rigging. Grade 10 components are made from even higher-strength steel (1000 MPa minimum tensile strength) and provide greater ultimate load capacity in the same physical size. Grade 10 is typically specified for extreme-duty applications such as heavy motor hoists, large-format LED walls or industrial lifting where space is limited and maximum strength is required. Both grades are significantly stronger and more reliable than standard DIN 580/582 components, and both are mandatory for compliance with DGUV Vorschrift 17 in professional entertainment rigging.

How often must eye bolts and rigging hardware be inspected?

Under DGUV Vorschrift 17 (formerly BGV C1), all load-bearing rigging hardware including eye bolts, eye nuts and suspension links must be inspected by a qualified person at least once per year. For touring productions, hire equipment or high-cycle applications, more frequent inspections are required — typically every three to six months or after a specified number of load cycles. Inspections must check for visible damage (cracks, deformation, corrosion), thread condition, swivel function (for swivel eye bolts) and legibility of markings. Any component showing signs of wear or damage must be withdrawn from service immediately. Inspection records must be kept for the lifetime of the equipment and made available to regulatory authorities on request. At LTT, we can provide inspection services and documentation for your rigging hardware, ensuring full compliance with German and European safety regulations.

What torque specifications apply when installing eye bolts into truss or steel structures?

Correct torque is critical for safe eye bolt installation. Under-tightening allows the bolt to rotate under load, while over-tightening can strip threads or crack the base material. Torque specifications vary by thread size and base material. For eye bolts installed into steel structures (minimum St 37), typical torque values are: M8 = 10 Nm, M10 = 20 Nm, M12 = 30 Nm, M16 = 60 Nm, M20 = 120 Nm, M24 = 200 Nm. For aluminium truss, reduce these values by approximately 30% and ensure the thread engagement depth is at least 1.5 times the nominal diameter. Always consult the manufacturer's installation instructions, which provide torque tables for various materials. Swivel eye bolts such as the RUD VRS series feature a star-profile key that allows tool-free installation and torque verification by hand. At LTT, we supply torque wrenches and installation tools alongside our rigging hardware to ensure correct and safe installation.

Eyelets, ring nuts and suspension links

Top seller

Riggatec Ringmutter DIN 582 M10 galv. verz.

Riggatec Ring Nut DIN 582 M10, electrogalvanized

€0.99 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Schnellverbindungsglied 5 mm DIN 56927 verz. Form B

Riggatec Quick-Connect Link, 5 mm, DIN 56927, Galvanized, Type B

€1.09 *

Scale prices: from €0.89

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Ringschraube DIN 580 M12 galv. verz.

Eye Bolt DIN 580 M12

€1.29 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Ringschraube DIN 580 M8 galv. verz.

Riggatec Eye Bolt DIN 580 M8, Galvanized

€0.79 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Ringmutter DIN 582 M8 galv. verz.

Riggatec Ring nut DIN 582 M8

€0.65 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Schnellverbindungsglied 8 mm DIN 56927 verz. Form B

Riggatec Quick-Connect Link, 8 mm, DIN 56927, Galvanized, Type B

€1.59 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Ringmutter schwerlast M12, rot 2,0 t

Riggatec Heavy-Duty Ring Nut M12, Red, 2.0 t

€5.79 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Riggatec Ringmutter DIN 582 M12 galv. verz.

Riggatec Ring Nut DIN 582 M12, electrogalvanized

€1.55 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

106 Articles

Filter

5 From 5 pages

No results were found for the filter!

Starpoint-Lastbock - RUD VLBG-Plus 1,35t M12, VIP-Gewinde Plus, mit variabler Einschraubtiefe H <116mm, inkl. Mutter und Scheibe
Sonderlänge Maß H= 25mm

Starpoint load block - RUD VLBG-Plus 1.35t M12, VIP thread Plus, with variable screw-in depth H < 116mm, incl. nut and washer Special length H= 25mm

Note Weight depends on the version. • Nominal load capacity WLL 1,350 kg • WLL (axial) 1,350 kg • A 32 mm • B 54 mm • C 34 mm • D 26 mm • E 38 mm • F 10 mm...

€179.95 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Riggatec Anschlagwirbel mit Drehgelenk M16x20mm, 2,24T - Güteklasse 8 nach EN 1677

Riggatec Shackle Swivel with Swivel Joint M16x20 mm, 2.24 T - Grade 8 per EN 1677

Riggatec Shackle Swivel with Swivel Joint M16x20mm, 2.24T - Grade 8 per EN 1677 Our Riggatec swivel eye is equipped with a swivel joint and features an M16 × 20 mm thread. The design complies...

Express delivery possible

€31.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Low stock; Delivery time: 1-3 days

Delivery time: 1-3 days

EUROLITE Schnellverbindungsglied Typ A-90

EUROLITE Quick Link Type A-90

EUROLITE quick linksThe EUROLITE quick links comply with the current regulation of the German professional insurance association as summed up in BGI 810-3:2007-03 Loads above persons. The quick...

€3.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

Riggatec hochfeste Ringschraube (GK8) Rot M 16

Riggatec high strength eyebolt red M 16

Eye Bolt Material: high quality tempered steel or screw steel • Version: powder-coated red, thread phosphated • Thread: M 16 • DIN 580/582 • Bearing capacity: 4.0 t...

€14.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

Starpoint-Ringmutter - VRM M12 bis 750kg

RUD Starpoint ring nut -VRM M12 up to 750kg

RUD Starpoint ring nut VRM The RUD Starpoint ring nut - VRM makes your work easier, because it is adjustable in the tension direction. Shape: star-shaped - clear difference from DIN 582 ring nut...

€79.90 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Riggatec Ringmutter DIN 582 M27 galv. verz.

Riggatec Ring Nut DIN 582 M27, galvanized

Riggatec Ring Nut DIN 582 M27, electrogalvanized Our Riggatec ring nut is drop-forged and made of C 15 E steel. The surface is electrogalvanized, and the ring nut has an M27 thread. The load...

€15.95 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Starpoint-Ringmutter mit Schlüsselblech - VRS M12 bis 750kg

Starpoint ring nut with key plate - VRS M12 to 750kg

Die RUD Starpoint eye bolt VRS simplifies your work because it can be adjusted in pull direction Form: star-shaped - significant difference to DIN 580 eye bolt • Colour: noticeable,...

€64.90 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Riggatec Karabiner mit Twistlock, Klasse B, Öffnung 25mm, schwarz

Riggatec carabiner with Twistlock, Class B, Opening 25mm, black

Features EN 362 • Twist locking steel class B connector • Colour: black • Opening: 25mm • Major axis strength: 20kN •

€19.16 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

NEW

ELLER-Schlinghaken, zulässige Gesamtlast (WLL): 2 t

ELLER Sling Hook WLL: 2 t

Safety factor 4:1 • WLL: 2 t • Safety pin and spring pin included • This sling hook is suitable for use with round (steel) slings and has a working load limit of 2 tonnes. It comes...

€30.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

ACCESSORY Eyebolt M8/40mm

Safety eyelet For holding, carrying, suspending and securing • Can be used as attachment gear or connection element, e.g. for screwing into the flying points of a loudspeaker cabinet...

Express delivery possible

€6.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

5 From 5 pages

Facts

Professional Eye Bolts, Eye Nuts and Suspension Links for Stage Rigging: Eye bolts, eye nuts and suspension links are essential rigging hardware components for professional stage and event technology. These threaded fasteners create secure lifting points for truss systems, lighting rigs, PA equipment and stage decorations. At LTT, you will find high-quality eye bolts and eye nuts from leading manufacturers such as Riggatec , RUD and other... Read more »

Viewed