What is a Case Stellboden (rack shelf) used for?

A Case Stellboden, or rack shelf, is used to mount equipment that has no 19" rack ears of its own inside a rack or flight case. It provides a stable steel floor for non-rackable devices such as compact DJ mixers, Hi-Fi amplifiers, wireless receivers and effect units. The shelf screws into the standard 482 mm front rails, and the equipment either rests on the surface or is bolted through the universal hole pattern in the base. This keeps a professional touring rack tidy, protected and organised.

What is the difference between a fixed and a retractable (ausziehbar) rack shelf?

A fixed rack shelf is bolted solidly into the rails and never moves, making it the most robust and most affordable choice for set-and-forget gear like amplifiers or power distributors. A retractable rack shelf runs on side-mounted slide rails and pulls forward like a drawer, giving You easy front access to controls and connections — ideal for DJ media players or mixers used during a live show. Fixed shelves carry more weight, while retractable shelves win on hands-on convenience. Choose based on whether load capacity or frequent access matters most for Your setup.

How many rack units (HE) does a rack shelf need?

A rack shelf needs enough rack units to clear the height of the device it carries. One rack unit (1 HE) equals 44.45 mm, and a 1 HE rack shelf has a front height of roughly 43–44 mm, suitable for low-profile gear. For taller devices, choose a 2 HE or 3 HE shelf, which offers more internal clearance. When planning Your rack, measure the height of the equipment first, then pick the shelf that provides adequate space without wasting rack units elsewhere in the case.

What load capacity can a 19" rack shelf hold?

The load capacity of a 19" rack shelf depends on its rack unit count, steel gauge and mounting type. A fixed shelf built from 1.2–2 mm steel carries more weight than a retractable model, where the slide rails are the limiting factor. To mount equipment safely, distribute the weight evenly across the shelf and bolt heavier or vibration-prone devices through the universal hole pattern in the base rather than leaving them loose. For touring use, always check the manufacturer's rating and avoid overloading a retractable shelf beyond its rail specification.

What depth of rack shelf fits my flight case?

The depth of a rack shelf must be shorter than the internal depth of Your flight case so that it clears the closed lid and leaves room for rear cabling. Rack shelves are commonly available from 375 mm to 420 mm deep. Measure the internal case depth first, then subtract space for connectors and plugs at the back. Shallow cases suit 375 mm shelves, while deeper touring racks take 420 mm trays. On retractable models, remember that the usable pull-out depth is a few centimetres less than the nominal figure because of the rail mechanism.

What does a Case Stellboden cost?

The price of a Case Stellboden depends on its type and size. Fixed rack shelves and simple rack trays typically start around €23 to €40, making them an affordable way to mount non-rackable gear. Retractable (ausziehbar) rack shelves with slide rails cost more, usually in the region of €65 to €80, because of the added mechanism and convenience. At LTT, all prices are shown including VAT plus shipping, with free shipping from €69 and a typical delivery time of 3–5 days for stocked models.

Which materials are used for a rack shelf and how durable are they?

A rack shelf for event use is almost always made from steel in a gauge of 1.2 mm to 2 mm, finished with a black powder coating. Steel construction provides the load-bearing strength needed to hold amplifiers, mixers and Hi-Fi components securely. The powder coating adds corrosion resistance and a scratch-tough surface that withstands the knocks of touring life. Extra-deep trays often have a rear edge raised about 10 mm for added stability. With basic cleaning and occasional screw checks, a powder-coated steel rack shelf stays reliable across many years of professional use.

Which rack shelf suits a DJ setup?

For a DJ setup, a retractable rack shelf is usually the best choice because it lets You pull media players, controllers or a compact mixer forward for direct access during a set. Match the shelf depth to Your touring rack and leave room at the rear for audio and power connectors. If a device sits untouched — such as a power distributor or amplifier — a fixed shelf saves money and offers higher load capacity. Combining both types in one rack keeps every piece of DJ equipment protected, organised and ready for fast load-in and load-out.

Case support base

Top seller

Adam Hall 19" Parts 87556 19" Rackwanne 1 HE mit Auszugsschienen

Adam Hall 19" Parts 87556 - 19" Rack Tray 1 U with Drawer Slides

€66.95 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

OMNITRONIC Trägereinschub 1/253 mit Bohrungen schwarz

OMNITRONIC Carrier 1/253 black Multistandard Holes

€15.08 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Adam Hall 19" Parts 8754 19" Rackwanne 1 HE

Adam Hall 19" Parts 8754 - 19" Rack Tray 1 U

€23.72 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall 19" Parts 87552 19" Rackablage 2 HE 375 mm tief

Adam Hall 19" Parts 87552 - 19" Rack Tray 2 U 375 mm depth

€30.71 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall 19" Parts 87551 19" Rackwanne 1 HE 375 mm tief

Adam Hall 19" Parts 87551 - 19" Rack Tray 1 U 375 mm depth

€24.14 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

ACCESSORY Rackboden 1HE mit Lüftungslöchern

ACCESSORY Rackbase 1U with ventilation holes

€23.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SHOWGEAR Shelf for Pro Metal Equipment Rack 1U

€26.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ACCESSORY Rackboden 2HE mit Lüftungslöchern

ACCESSORY Rackbase 2U with ventilation holes

€36.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

27 Articles

Filter

2 From 2 pages

No results were found for the filter!

NEW

ADJ Aria X2 Shelf

Engineered with precision and durability in mind, this rackmount shelf is designed to seamlessly integrate into your network infrastructure, providing a reliable and space-efficient platform for...

€19.90 *

incl. tax, plus shipping costs

Availability:

Low stock; Delivery time: 3-5 days

Delivery time: 3-5 days

MONACOR RH-110 482 mm (19") mounting plate, 1 RS

482 mm (19") mounting plate, 1 RS Suitable for rack installation of devices incapable of being installed into a rack (e.g. hi-fi components) • Version with various mounting holes...

€30.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Adam Hall 19" Parts 87553 19" Rackwanne 3 HE 375 mm tief

Adam Hall 19" Parts 87553 - 19" Rack Tray 3 U 375 mm depth

19" Rack Tray 3 U 375 mm depth 19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm Rear edge is folded up 10 mm for extra stability • Internal...

€30.30 *

incl. tax, plus shipping costs

Availability:

Currently not available

2 From 2 pages

Facts

Case Stellboden – Rack Shelves for 19" Flight Cases at a Glance: A Case Stellboden (rack shelf) turns any 19" rack into a mounting spot for gear that has no rack ears of its own — mixers, effect units, Hi-Fi components or media players. As your specialist for event technology , LTT stocks fixed and retractable shelves in robust steel construction, from 1 HE to multi-unit trays with depths of 375–420 mm. Whether You build touring racks... Read more »

Viewed